Posts

Showing posts from 2013

Solutions: RAID starting at md127 instead md0 issue

If you use software raid on Linux (I use Ubuntu). may someone wonder why after create raid to /dev/md0, but after reboot, raid device become to /dev/md127... Why?

That because you need to update Initramfs by command update-initramfs

$sudo update-initramfs -u
What's initramfs from Ubuntu Wiki
initramfs is the solution introduced for the 2.6 Linux kernel series. The idea is that there's a lot of initialisation magic done in the kernel that could be just as easily done in userspace. At a first glance, it is only slightly different than a traditional initrd. Initramfs' are loaded quite a bit sooner than initrd's are. The key parts of initramfs are: CPIO archive, so no filesystems at all are needed in kernel. The archive is simply unpacked into a ram disk. This unpacking happens before do_basic_setup is called. This means that firmware files are available before in-kernel drivers load. The userspace init is called instead of prepare_namespace. All finding o…

Windows 8.1 & Windows Server 2012 R2 - RTM released!

Make sure your .ISO file is untouched file, check SHA before you install :)
Please noteWindows 8.1 RTM build number is 9600.16384.130821-1623 


Windows 8.1Windows 8.1 (multiple editions) (x86) - DVD (English-United Kingdom)

File Name: en-gb_windows_8_1_x86_dvd.isoFilesize: 2785 MB; 2.71 GB (2,919,948,288 bytes)Languages: EnglishSHA1: 7CD38ECE3D86339BC0BFEF4D4FAC6C5975248383
Windows 8.1 (multiple editions) (x86) - DVD (English)
File Name: en_windows_8_1_x86_dvd.isoFilesize: 2780 MB; 2.71 GB (2,915,131,392 bytes)Languages: EnglishSHA1: 802CFCD3A411D99C097EA7E747F0B6697F9BDAC4
Windows 8.1 (multiple editions) (x64) - DVD (English-United Kingdom)
File Name: en-gb_windows_8_1_x64_dvd.isoFilesize: 3723 MB; 3.63 GB (3,904,124,928 bytes)Languages: EnglishSHA1: 42458E48CECEBAB8BF5D58220478FDA42B0D2990
Windows 8.1 (multiple editions) (x64) - DVD (English)
File Name: en_windows_8_1_x64_dvd.isoFilesize: 3719 MB; 3.63 GB (3,899,295,744 bytes)Languages: EnglishSHA1: BC2F7FF5C91C9F0F8676E39E703085C65072139BWin…

How to set path for nginx web servers on Windows

If you using nginx web server on Windows version. may you face some issue if you setup path to another drive, since nginx 1.4.2 version you can't use absolute path. You may be surprised if you can't config to use path like d:/apache/htdocs/....

But here is solution!  use prefix /cygdrive/ then follow with your path.

    location / {
        root   /cygdrive/d/xampp/htdocs;
        index  index.html index.htm;
    }

that's it. :)